Diameter [mm]: 228,6 mm ; Width [mm]: 42 mm ; Friction Surface Width [mm]: 42 mm ; Weight [kg]: 1 kg ; ArticleState: Normal ; General Information: http://www.abs-bv.nl/pdp/9362.html
Manufacturer Restriction: ATE ; Wear Warning Contact: not prepared for wear indicator ; Height [mm]: 67,2 mm ; Length [mm]: 156,4 mm ; Thickness [mm]: 18 mm ; Fitting Position: Front Axle ; ArticleState: Normal
Width 1 [mm]: 155,1 mm ; Height 1 [mm]: 62,4 mm ; Width 2 [mm]: 156,3 mm ; Height 2 [mm]: 67 mm ; Thickness [mm]: 18,1 mm ; Wear Warning Contact: not prepared for wear indicator ; Wear Warning Contact: excl. wear warning contact ; Brake System: ATE ; Inspection Tag: E1 90R-011403/1339 ; MAPP code available: ; ArticleState: Normal ; Technical Information: Es ist technisch möglich, ATE Ceramic Bremsbeläge mit der Po
werDisc oder mit gelochten Bremsscheiben zu kombinieren.
Die Bremsleistung bleibt bei dieser Paarung gleich hoch, wie
bei einem ATE Original- oder OE-Bremsbelag.
Das Zusammenspiel der beiden Bauteile kann aber zu einer erh
öhten Geräuschentwicklung beim Bremsvorgang führen.
ATE Ceramic Bremsbeläge sind Beläge, die für den komfortorie
ntierten Fahrer entwickelt wurden.
Grundsätzlich empfehlen wir ATE Ceramic Bremsbeläge daher mi
t normalen , das heißt glatten Bremsscheiben zu kombinieren.
Pulleys: with crankshaft pulley ; Shape: Oval ; Number of Teeth: 250 ; Width [mm]: 141 mm ; Driven Units: excl. water pump ; Supplementary Article/Info 2: with belt ; ArticleState: Normal
Thickness [mm]: 109 mm ; Outer diameter [mm]: 96,5 mm ; Supplementary Article/Info 2: with seal ; Weight [kg]: 0,31 kg ; Filter type: In-Line Filter ; ArticleState: Normal ; General Information: Die von uns gelieferten Produkte sind ausschließlich dem
bestimmungsgemäßen Gebrauch zuzuführen. Der Einbau darf
nur durch geschultes Fachpersonal erfolgen. Produkte werden
in der Regel ohne Montageanleitung geliefert.
Length [mm]: 156,3 mm ; Width [mm]: 67,2 mm ; Thickness [mm]: 17,8 mm ; Fitting Position: Front Axle ; Weight [kg]: 1,97 kg ; ArticleState: Normal ; General Information: Die von uns gelieferten Produkte sind ausschließlich dem
bestimmungsgemäßen Gebrauch zuzuführen. Der Einbau darf
nur durch geschultes Fachpersonal erfolgen. Produkte werden
in der Regel ohne Montageanleitung geliefert.
Height 1 [mm]: 62,4 mm ; Height 2 [mm]: 67 mm ; Brake System: Ate - Teves ; Width 1 [mm]: 155,1 mm ; Width 2 [mm]: 156,4 mm ; Thickness/Strength 1 [mm]: 18,5 mm ; Number of Springs: 2 ; Number of pads: 4 ; ArticleState: Normal ; Technical Information: Number of Shims: 4
; Technical Information: Back Spring Length: 49
Number of Teeth: 141 ; Length [mm]: 1343 mm ; Width [mm]: 25,4 mm ; Pulleys contained: 2 ; ArticleState: Normal ; Technical Information: Für Motoren mit optimiertem Steuertrieb. Kennzeichen:
Zahnriemen-Antriebsrad mit Bohrung auf der dem Motor
zugewandten Seite. Siehe Service Information.
Number of Teeth: 141 ; Length [mm]: 1343 mm ; Width [mm]: 25,4 mm ; ArticleState: Normal ; General Information: http://www.bosch-automotive-catalog.com/pdp/1987949666
Width [mm]: 25,4 mm ; Number of Teeth: 141 ; Weight [kg]: 0,207 kg ; Packaging length [cm]: 25,5 cm ; Packaging width [cm]: 16 cm ; Packaging height [cm]: 3 cm ; ArticleState: Normal
Diameter [mm]: 60 mm ; Width [mm]: 29 mm ; Tensioner Pulley Actuation: Automatic ; for article number: KD079 ; ArticleState: only supplied in parts list
Fitting Position: Front Axle ; Weight [kg]: 1,685 kg ; Quantity: 4 ; Thickness [mm]: 17,8 mm ; Width [mm]: 155,3 mm ; Height [mm]: 67 mm ; ArticleState: Normal
Length [mm]: 156,4 mm ; Fitting Position: Front Axle ; Height [mm]: 62,2 mm ; Thickness [mm]: 18 mm ; Brake System: ATE ; Weight [kg]: 1,72 kg ; ArticleState: Normal ; General Information: Die von uns gelieferten Produkte sind ausschließlich dem
bestimmungsgemäßen Gebrauch zuzuführen. Der Einbau darf
nur durch geschultes Fachpersonal erfolgen. Produkte werden
in der Regel ohne Montageanleitung geliefert.
Width [mm]: 25,4 mm ; Number of Teeth: 141 ; Surface: Coated ; Supplementary Article/Info 2: for camshaft ; Weight [kg]: 0,63 kg ; Observe service information: ; ArticleState: Normal ; General Information: Die von uns gelieferten Produkte sind ausschließlich dem
bestimmungsgemäßen Gebrauch zuzuführen. Der Einbau darf
nur durch geschultes Fachpersonal erfolgen. Produkte werden
in der Regel ohne Montageanleitung geliefert.
Width [mm]: 25,4 mm ; Number of Teeth: 141 ; Surface: Coated ; Supplementary Article/Info 2: with gear ; Weight [kg]: 1,25 kg ; Observe service information: ; ArticleState: Normal ; General Information: Die von uns gelieferten Produkte sind ausschließlich dem
bestimmungsgemäßen Gebrauch zuzuführen. Der Einbau darf
nur durch geschultes Fachpersonal erfolgen. Produkte werden
in der Regel ohne Montageanleitung geliefert.
Thickness [mm]: 109 mm ; Outer diameter [mm]: 96,5 mm ; Supplementary Article/Info 2: with seal ; Weight [kg]: 0,31 kg ; Filter type: In-Line Filter ; ArticleState: Normal ; General Information: Die von uns gelieferten Produkte sind ausschließlich dem
bestimmungsgemäßen Gebrauch zuzuführen. Der Einbau darf
nur durch geschultes Fachpersonal erfolgen. Produkte werden
in der Regel ohne Montageanleitung geliefert.
Width [mm]: 29 mm ; Inner diameter [mm]: 8,2 mm ; Outer diameter [mm]: 60 mm ; Operating Mode: Automatic ; Weight [kg]: 0,29 kg ; ArticleState: Normal ; General Information: für Zahnriemen
; General Information: Die von uns gelieferten Produkte sind ausschließlich dem
bestimmungsgemäßen Gebrauch zuzuführen. Der Einbau darf
nur durch geschultes Fachpersonal erfolgen. Produkte werden
in der Regel ohne Montageanleitung geliefert.
Width [mm]: 25,4 mm ; Number of Teeth: 141 ; Surface: Coated ; Supplementary Article/Info 2: for camshaft ; Weight [kg]: 0,17 kg ; Belts: with trapezoidal tooth profile ; Observe service information: ; ArticleState: Normal ; General Information: Die von uns gelieferten Produkte sind ausschließlich dem
bestimmungsgemäßen Gebrauch zuzuführen. Der Einbau darf
nur durch geschultes Fachpersonal erfolgen. Produkte werden
in der Regel ohne Montageanleitung geliefert.
Fitting Position: Front Axle ; Thickness [mm]: 17,2 mm ; Height 2 [mm]: 66,9 mm ; Length [mm]: 155,1 mm ; Length 1 [mm]: 156,3 mm ; Height 1 [mm]: 58,4 mm ; Width [mm]: 58,4 mm ; Width [mm]: 66,9 mm ; WVA Number: 23723 ; WVA Number: 23724 ; Brake System: ATE ; Inspection Tag: R90 Homologated ; Wear Warning Contact: not prepared for wear indicator ; Weight [kg]: 2,25 kg ; ArticleState: Normal ; Technical Information: Technical Information:https://goo.gl/A0Z6HH
; Brief Information: http://ecofriction.com
; Technical Information: http://www.ferodo.com/de-de/Pages/Home.aspx
SICHER: Kürzerer Bremsweg als viele Wettbewerbern
QUALITÄT: Erfüllt OE-Spezifikationen und übertrifft viele
Normen
EASY : Einfache Einbau auf 99% der Fahrzeuge in Europa
EFFEKTIV: Hervorragendes Anti-Fading und
Nassansprechverhalten
HALTBAR: Längere Lebensdauer und geringerer
Bremsscheibenverschleiß
GERÄUSCHARM: Geräuschmindernde Eigenschaften fördern den
Fahrkomfort
Über 100 Jahre Erfahrung auf dem Gebiet Reibung und Bremsen
bedeuten, dass der Name Ferodo gleichbedeutend mit
Spitzenleistung ist. Ferodo war weltweit die erste Marke,
die sich ausschließlich mit der Konstruktion und Herstellung
von Reibmitteln beschäftigt. Und heute entwickeln unsere
erfahrenen Ingenieure richtungsweisende Lösungen sogar für
schwierigste Bedingungen.
Fitting Position: Front Axle ; Length [mm]: 156,4 mm ; Width [mm]: 155,4 mm ; Thickness [mm]: 18,3 mm ; Height [mm]: 67,2 mm ; Brake System: Ate ; ArticleState: Normal
Manufacturer Restriction: ATE ; Length [mm]: 156,4 mm ; Height [mm]: 67,2 mm ; Thickness [mm]: 18 mm ; Wear Warning Contact: not prepared for wear indicator ; ArticleState: on demand
Inspection Tag: E990R-01112/1007 ; Supplementary Article/Supplementary Info: with accessories ; Fitting Position: Front Axle ; Length [mm]: 156,4 mm ; Thickness [mm]: 18 mm ; Height [mm]: 67 mm ; Length 2 [mm]: 155,2 mm ; Height 2 [mm]: 62,2 mm ; Brake System: ATE ; Supplementary Article/Info 2: with adhesive film ; Supplementary Article/Supplementary Info: with spring ; ArticleState: Normal
Height 1 [mm]: 62,4 mm ; Height 2 [mm]: 67 mm ; Brake System: Ate - Teves ; Width 1 [mm]: 155,1 mm ; Width 2 [mm]: 156,4 mm ; Thickness/Strength 1 [mm]: 18,5 mm ; Number of Springs: 2 ; Number of pads: 4 ; ArticleState: Normal ; Technical Information: Number of Shims: 4
; Technical Information: Back Spring Length: 49
Thickness [mm]: 18,3 mm ; Height 1 [mm]: 62,4 mm ; Height 2 [mm]: 67 mm ; for article number: 05P1190 ; Brake System: ATE ; Width 1 [mm]: 155,1 mm ; Width 2 [mm]: 156,3 mm ; ArticleState: Normal
Fitting Position: Rear Axle ; for article number: 01184 ; Supplementary Article/Info 2: with handbrake lever ; Width [mm]: 42 mm ; Diameter [mm]: 228,4 mm ; ArticleState: Normal
Diameter [mm]: 228,4 mm ; Width [mm]: 42 mm ; Weight [kg]: 1,9 kg ; Packaging length [cm]: 19,8 cm ; Packaging width [cm]: 12,5 cm ; Packaging height [cm]: 8,2 cm ; ArticleState: Normal
Inspection Tag: E990R-01112/1007 ; Supplementary Article/Supplementary Info: with accessories ; Fitting Position: Front Axle ; Length [mm]: 156,4 mm ; Thickness [mm]: 18 mm ; Height [mm]: 67 mm ; Length 2 [mm]: 155,2 mm ; Height 2 [mm]: 62,2 mm ; Brake System: ATE ; Supplementary Article/Info 2: with adhesive film ; Supplementary Article/Supplementary Info: with spring ; ArticleState: Normal
Pulleys: with crankshaft pulley ; Shape: Oval ; Number of Teeth: 250 ; Width [mm]: 141 mm ; Driven Units: excl. water pump ; Supplementary Article/Info 2: with belt ; ArticleState: Normal
Inspection Tag: E990R-01112/1007 ; Supplementary Article/Supplementary Info: with accessories ; Fitting Position: Front Axle ; Length [mm]: 156,4 mm ; Thickness [mm]: 18 mm ; Height [mm]: 67 mm ; Length 2 [mm]: 155,2 mm ; Height 2 [mm]: 62,2 mm ; Brake System: ATE ; Supplementary Article/Info 2: with adhesive film ; Supplementary Article/Supplementary Info: with spring ; ArticleState: Normal
Number of Teeth: 141 ; Width [mm]: 25,4 mm ; Belts: with rounded tooth profile ; Part number of the recommended special tools: VKN 1005 ; ArticleState: Normal ; General Information: Spannrollensatz
Number of Teeth 1: 141 ; Number of belts: 1 ; Weight [g]: 795 g ; Width 1 [mm]: 25 mm ; ArticleState: Normal ; Technical Information: Anzahl der Spannrollen:2
Width [mm]: 25,4 mm ; Number of Teeth: 141 ; Supplementary Article/Info 2: with gear ; Weight [kg]: 1,25 kg ; Observe service information: ; ArticleState: Normal ; General Information: Die von uns gelieferten Produkte sind ausschließlich dem
bestimmungsgemäßen Gebrauch zuzuführen. Der Einbau darf
nur durch geschultes Fachpersonal erfolgen. Produkte werden
in der Regel ohne Montageanleitung geliefert.
Length [mm]: 156,4 mm ; Fitting Position: Front Axle ; Height [mm]: 62,2 mm ; Thickness [mm]: 18 mm ; Brake System: ATE ; Weight [kg]: 1,72 kg ; ArticleState: Normal ; General Information: Die von uns gelieferten Produkte sind ausschließlich dem
bestimmungsgemäßen Gebrauch zuzuführen. Der Einbau darf
nur durch geschultes Fachpersonal erfolgen. Produkte werden
in der Regel ohne Montageanleitung geliefert.
Width [mm]: 25,4 mm ; Number of Teeth: 141 ; Supplementary Article/Info 2: for camshaft ; Weight [kg]: 0,17 kg ; Belts: with trapezoidal tooth profile ; Observe service information: ; ArticleState: Normal ; General Information: Die von uns gelieferten Produkte sind ausschließlich dem
bestimmungsgemäßen Gebrauch zuzuführen. Der Einbau darf
nur durch geschultes Fachpersonal erfolgen. Produkte werden
in der Regel ohne Montageanleitung geliefert.
Width [mm]: 29 mm ; Inner diameter [mm]: 8,2 mm ; Outer diameter [mm]: 60 mm ; Operating Mode: Automatic ; Weight [kg]: 0,29 kg ; ArticleState: Normal ; General Information: für Zahnriemen
; General Information: Die von uns gelieferten Produkte sind ausschließlich dem
bestimmungsgemäßen Gebrauch zuzuführen. Der Einbau darf
nur durch geschultes Fachpersonal erfolgen. Produkte werden
in der Regel ohne Montageanleitung geliefert.
Thickness [mm]: 109 mm ; Outer diameter [mm]: 96,5 mm ; Supplementary Article/Info 2: with seal ; Weight [kg]: 0,31 kg ; Filter type: In-Line Filter ; ArticleState: Normal ; General Information: Die von uns gelieferten Produkte sind ausschließlich dem
bestimmungsgemäßen Gebrauch zuzuführen. Der Einbau darf
nur durch geschultes Fachpersonal erfolgen. Produkte werden
in der Regel ohne Montageanleitung geliefert.
Width [mm]: 25,4 mm ; Number of Teeth: 141 ; Supplementary Article/Info 2: for camshaft ; Weight [kg]: 0,63 kg ; Observe service information: ; ArticleState: Normal ; General Information: Die von uns gelieferten Produkte sind ausschließlich dem
bestimmungsgemäßen Gebrauch zuzuführen. Der Einbau darf
nur durch geschultes Fachpersonal erfolgen. Produkte werden
in der Regel ohne Montageanleitung geliefert.
TecDoc Engine Number: FORD UGJE ; Equipment Variant: Duratorq TDCI ; Construction year to: 05.2015 ; Number of Teeth: 141 ; Driven Units: Driven unit: camshaft ; Width [mm]: 25,4 mm ; Supplementary Article/Info 2: for crankshaft ; ArticleState: Normal
TecDoc Engine Number: FORD UGJE ; Equipment Variant: Duratorq TDCI ; Construction year to: 05.2015 ; for components see parts list: ; Pulleys contained: 2 ; Number of belts: 1 ; ArticleState: Normal
Fitting Position: Front Axle ; Thickness [mm]: 18,2 mm ; Wear Warning Contact: not prepared for wear indicator ; Supplementary Article/Supplementary Info: without accessories ; Number of pads: 4 ; ArticleState: Normal
Fitting Position: Front Axle ; Manufacturer Restriction: ATE ; Thickness [mm]: 18 mm ; Length [mm]: 156,4 mm ; Height [mm]: 67 mm ; Wear Warning Contact: not prepared for wear indicator ; ArticleState: Normal
for article number: 626.1190 ; Width 2 [mm]: 156,3 mm ; Brake System: ATE ; Height 1 [mm]: 62,4 mm ; Thickness [mm]: 18,3 mm ; Width 1 [mm]: 155,1 mm ; Height 2 [mm]: 67 mm ; ArticleState: Normal
Number of Teeth: 141 ; Width [mm]: 25,4 mm ; Weight [kg]: 0,63 kg ; Required quantity: 1 ; Supplementary Article/Info 2: for camshaft ; ArticleState: Normal ; General Information: Swag 62939203
Number of Teeth: 141 ; Width [mm]: 25,4 mm ; Weight [kg]: 0,207 kg ; Packaging length [cm]: 25,5 cm ; Packaging width [cm]: 16 cm ; Packaging height [cm]: 3 cm ; ArticleState: Normal ; General Information: Contitech CT1162
Number of Teeth: 141 ; Width [mm]: 25,4 mm ; Weight [kg]: 1,25 kg ; Required quantity: 1 ; Supplementary Article/Info 2: with gear ; ArticleState: Normal ; General Information: Swag 62939205
Number of Teeth: 141 ; Width [mm]: 25,4 mm ; Weight [kg]: 0,17 kg ; Required quantity: 1 ; Supplementary Article/Info 2: for camshaft ; Belts: with trapezoidal tooth profile ; ArticleState: Normal ; General Information: Swag 62937285
Inspection Tag: E990R-01112/1007 ; Supplementary Article/Supplementary Info: with accessories ; Fitting Position: Front Axle ; Length [mm]: 156,4 mm ; Thickness [mm]: 18 mm ; Height [mm]: 67 mm ; Length 2 [mm]: 155,2 mm ; Height 2 [mm]: 62,2 mm ; Brake System: ATE ; Supplementary Article/Info 2: with adhesive film ; Supplementary Article/Supplementary Info: with spring ; ArticleState: Normal
Fitting Position: Front Axle ; Manufacturer Restriction: ATE ; Length 1 [mm]: 155,1 mm ; Length 2 [mm]: 156,4 mm ; Width 1 [mm]: 62,4 mm ; Width 2 [mm]: 67 mm ; Thickness [mm]: 17,5 mm ; Weight [kg]: 2,03 kg ; ArticleState: Normal